Stories — Ahearne Cycles

Ahearne Cycles

Touring

Oregon Outback Bike Tour

Touring, Travel, ThoughtsJoseph Ahearne2 Comments

Oregon Outback GPS Map

The final tally for the ride was 450 miles, give or take. Klamath Falls (Oregon-California border) to the Deschutes Recreation Area (Oregon-Washington border), and then down the Historic Columbia River highway to return to Portland.

There were seven of us riding together, which on a bike ride over several days can feel a little like herding cats. But all of us got along really well — no fist fights broke out — and, thankfully, we had no major bike mechanical problems, nobody crashed, all and all we made it through smiling, even if exhausted, sore, dirty and overheated.

Kristina: Tough as Nails

Kristina did partially tear her achilles tendon during the ride, and now, after having gone to the doctor, she’s wearing “the boot.” She’s tougher than I am, I think, because she was clearly in some serious pain while riding, but we were so far out into the middle of nowhere, that, as she said, “What choice did I have but to ride?”

Seven in Shaniko

 

The route was definitely remote. I don’t think we saw a car for the first three days. Lots of cows, hawks, some deer and elk, many different kinds of rodents, several snakes and lizards, a million types of birds, all kinds of carcasses in varying poses and levels of decay. The trails and gravel roads were relatively smooth, but over hours in a day the vibration was tiring. My sore ass and sore hands. I lowered my tire pressure, which helped, but I didn’t go too low because with the but with the weight on my bike I didn't go too low for fear of getting a pinch flat.

Campfire Dinner

I don’t even know what to say about the ride in general except that it was pretty awesome. Pretty and awesome. I saw parts of Oregon that I’ve never seen, and from a perspective in which I could smell it, feel it, taste it, my body had to push over it. The sky was so massive dynamic. The nights were cold, the days mostly hot. The wind was intense. It was an adventure, and every day presented a new challenge; big gravel climbs, stream crossings, unbroken heat, water scarcity, threatening storms, physical & mental exhaustion, new aches & pains, the existentialism that comes with being in big empty places. It’s interesting watching the internal dialogue that goes on while pedaling on a long, hard ride, and how the tone of optimism or negativity of what’s streaming through your head is directly linked to how your physical body feels in any given moment. When you’re tired, hungry, or in any sort of discomfort or pain, the volume of the negativity may turn up. Or, if you’re well rested, well fed, cruising with a tail wind, the voices in your head may sing with joy. You can’t listen to either voice too closely because as sure as the road rolls under you the voice will pass away and some new thread of thought will arise. Letting it go (pedal-pedal-pedal), and letting it go again. This is the meditation of cycling, watching your breathing, your body taking over where your mind leaves off.

Barn & Sky

This ride was challenging, for sure, but I felt like the route was well chosen, the maps were close enough to accurate that we didn’t have much trouble finding our way. We stopped at a few intersections, consulted each other about which route was the “right” route. There was no back-tracking, except for the time when Jrdn took us up the massive hill that he wanted to climb, the one that came to a dead end. But that was all in fun, and we’re still thanking him for that.

Jrdn's favorite climb led past this sign

Climb out of the Columbia River Valley

Donnie of Velodirt really did his homework when putting together this ride. The days where water was scarce were well noted on the cue sheet, and as a group we made sure to come prepared with plenty of water carrying capacity, and filtration systems. Whenever we came across a stream and knew that it might be our only source for some miles to come, we loaded up. And for food, each of us carried enough to feed ourselves for several days, and resupplied when the opportunity presented itself. We didn’t pack light. We had tools and patches and spare tubes, extra fasteners, first aid and gorilla tape, bug repellant and some whiskey. We didn’t have to use a lot of the extra things we brought, but what we did need we were glad we had.  I don’t think this was a very good bike tour for someone with no experience — not a good learning trip because the stakes were too high, and there was not really any good way to bail out of you lacked something crucial. But, if prepared, and prepared to rough it, there’s no better way to tour than away from traffic.

As for the four Ahearne bikes on this trip, there were no complaints. We were all grateful for the fat, knobby 650b tires, for the inherent flex of steel to help take up the road shock, and the carrying capabilities these bikes offer. The handling on fast gravel descents was confident and sure, at least as much as fast gravel descents allow. They climbed well, and took the abuse of being fully loaded over days of bumps, dirt, pumice sand and stream crossings. There were no mechanical issues, and each person said they were really pleased with the overall ride of their bike. Better yet, this bike has been officially named. From here on out it’s going to be called the Outback. The off road touring bike. I’ll talk more about the bike soon. 

The Outback Machines

Stainless Steel Touring Bike

News, TouringJoseph Ahearne3 Comments

This bike has gotten a lot of attention so far in its short life. People seem to like shiny things, and this one does indeed shine. Beyond being blindingly bright, there are so many details that I figured I ought to lay it out for those who might be interested. The bike is mostly finished. There are a couple more bags that need to be made, and a decaleur that will mount off the stem -- in this sense it is still a work in progress. So, here's the low-down:Stainless Steel Touring

Spork Head Tube BadgeThe frame and fork are made from KVA stainless steel. The split-plate fork crown is made from laser cut stainless.  The racks and stem are made from chromoly steel, and were polished and chromed.

The bike has 26" wheels (international standard -- this is a touring bike, after all), disc brakes, a connectorless front generator hub made by Schmidt. That means that there is no plug to worry about when changing a flat tire. The wire runs from the inner face of the dropout directly into the fork leg. The front and rear lights are powered off the hub, and the wiring is all internal.Breakaway Binder

The frame is a breakaway style, with a coupler on the down tube, and a breakaway point on the seat tube. The seat post is integral to the structure of this system, which is brilliant and simple (No, I didn't invent this. Neither did Tom Ritchey -- it came from way further back than even his design). The seat stays come in below the seat tube breaking point, and the rear rack stays attach higher up on the seat tube, where seat stays would normally be. This gives the bike the appearance of having a traditional rear triangle, and serves to support the rear rack. 

Front Rack & LightThe front rack has an upper deck that can be used intependantly of the low riders, which are detachable. The rack supports the fender and the front light. The rear rack has an integrated u-lock holder. Notice the leather sleeve on the lock shackle. This was made by Dirt Jr., right here in Portland. I plan to put these up for sale on my website soon. They look so much nicer than what comes with the lock. We're working on a vegan option as well. 

Rear Rack & Lock HolderThe frame uses traditional tubing dimensions (1" top tube; 1 1/8" down & seat tubes), and has a straight truss, or second, top tube. This supports the head tube and seat tube, stabilizing the ride for weight bearing, particularly when the bike is fully loaded with bags. The space between the two top tubes was an ideal place to add storage, and the frame bag was custom made by Black Star Bags here in Portland. There's enough capacity in this bag to carry a couple of tubes, maybe even a folding tire, tire levers, patches, a multi-tool, energy bars, phone, etc. 

Stainless LogoThe down tube logo is also stainless steel, laser cut and brazed on. It took three of us to keep it set while brazing. Next time, I need to video record the process. I left the panel around the logo exactly as it looks right after brazing, without polish. That gives it the burnt, dirty look, which really stands out nicely.

There is a polished titanium spork head tube badge that is removable, and fully functional. People who ride bikes have to eat, right?Stainless Steel Touring

Part of the reason I built this bike was because I hadn't yet seen a really utilitarian bicycle made from stainless steel. Stainless is expensive, and the amount of time and labor required to bring it to a mirror finish was ridiculous, but the final product is so striking that I believe it was worth it. I hope you agree. I would like to see the same style bicycle, or something worthy of commuting, made from stainless steel and with a brushed finish. Everything Shiny!

Polished StemAnother reason I built this bike was because I was invited by the Portland Art Museum to display a couple of bicycles along with the Cyclepedia exhibit this past summer, 2013. It was an honor to be invited, and I wanted to make something that I believed was worthy of being shown in such a prestigeous museum.

Here above is the photo series from my flickr site. There are a few repeats, but I chose to use them all, because each of them looks so good. Photo credit goes to Anthony Bareno. He took all these in the studio at Velo Cult. He said it was the most difficult bike he's ever shot. Too many reflections. If only there were some way to photograph this bike in the dark! Please check back in the future to get a full ride report. 

 

 

Free Admission at the Portland Art Museum

City Bike, News, TouringJoseph Ahearne1 Comment

The Portland Art Museum has free admission every forth Friday of the month (which is, it just so happens, today!), from 5 - 8pm. This evening there's going to be food carts, the Metrofeits beer bike (which I'm told will be pouring kombucha), and, yes, free entry into the Cyclepedia exhibit.

My bikes are about to be set up there, and will be on display from today, 23 August, through 30 August. I'll be hanging around the museum this evening for the festivities, and to talk about my bikes, from 5 - 8. If you can't make it over this evening, I'll also be there most of the day on Sunday, the 25th of August.

Here are a couple of photos of the finished bikes that will be at the Portland Art Museum starting today. I hope I see you at the exhibit!

Stainless Steel Touring Bike

 

Manifest 2.0 Commuter 

Brenner Commuter

City Bike, TouringJoseph Ahearne1 Comment

Here we've got a straight-forward lugged commuter.

Brenner Commuter

It's a classy bike for a classy lady. Nothing brightens a gray winter sky better than a warm paint job. This bike has racks and enough carrying capacity to go on tours, and it has all the standard equipment for riding year round here in the northwest. I think the photos speak for themselves. Enjoy.